You can select up to 6 products for a torque curve comparison. The attribute is being reset. The calculated values are then compared to the measured values in every cycle. The sensorless system from Nanotec, in contrast, operates with very few parameters, which do not actually have to be known to the user: They will appear as only one curve. The Results will adjust themselves automatically to the values you have set. Identical flange size as the standard motor ST, therefore

Uploader: Jum
Date Added: 3 December 2005
File Size: 68.73 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 55547
Price: Free* [*Free Regsitration Required]

Virtual encoder replaces real encoder In order to be able to benefit from the advantages of field-oriented control even in price sensitive applications, Nanotec has developed a sensorless control for stepper motors that uses a virtual encoder in the controller to determine the current position and speed of the rotor.

How do you hear about us? Use more attributes to filter and to find the right combination for your requirements.

This stepper motor is slightly larger flange size 60×60 mm than the stepper motors of the ST series, but To have the full featured product finder experience, please activate JavaScript in your browser. Some attributes have similar names but are used for different kinds of products.

IP65 Stepper Motors | NANOTEC

Please wait while productfinder is loading Please wait while productfinder is loading The heart of closed loop technology is a power-adjusted current control and control signal feedback. Although servos were often more expensive to procure due to the tedious testing of ramps to avoid resonance bands and because of the more complex sizing on account of the lack of feedback, they were easier to commission, and this made them more attractive for limited lot production. For larger quantities, please contact our sales department: You will find the instructions here.

  BROTHER MFC-3820 DRIVER

Click the Remove attribute button. It is possible to switch automatically to open loop mode for lower speeds and for positioning purposes.

For larger quantities, please contact our sales department: How to use the product finder Product Finder Instructions. In the legend table you can then see the speed values.

There is a need to match a stepper motor with an existing machine for product development purposes, however the only thing known about the motor required is the mounting hole pitch — 70mm mounting and 14mm shaft.

Some attributes have similar names but are used for different kinds of products.

Full Service Provider of Nanotec | Stepper Motors | AllDrives & Controls Ltd

Solid torque curves represent thrust, and dashed torque curves represent output power. Open the attribute in the Filter. A virtual encoder replaces a real steppee To be able to benefit from the advantages of field-oriented control in these applications, Nanote has developed a sensorless, i. BLDC and stepper motors are controlled on a field-oriented basis as a function of the load and differ only in terms of the working points resulting from the differing number of poles.

  BROADCOM BCM5709C NETXTREME II GIGE ISCSI ADAPTER DRIVER DOWNLOAD

Select the attribute and click Add attribute.

Hybrid Stepper Motors

These calculated values are measured as well. Use more attributes to filter and to find the right combination for your requirements.

They are optionally available with You will find the instructions here. Compact motor with very high torque.

Hollow-Shaft Motors

Current per Winding 9. By choosing All Drives and Controls for your Nanotec stepper motor supplies and advice, you can be sure that you are able to finalise a development that is completely ready for serial production, quickly and affordably.

Enter a search word or scroll through the list to find the desired attribute.

Current per Winding 0. Do you have a question regarding Nanotec stepper motors? The SCA boasts in excess of