To diagnose a problem, first find the error symptom in the left column. The Setup Utility main menu then appears: The defaults place demands on the system that may be greater than the performance level of the components, such as the CPU and the memory. Parameter Date Description Lets you set the date following the weekdaymonth-day-year format Options Weekday: This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.

Uploader: Vikasa
Date Added: 17 March 2008
File Size: 8.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 17023
Price: Free* [*Free Regsitration Required]

This item allow user set the machine power state when connect the AC power.

Acer AcerPower S280 Win XP Drivers Download

This section provides a brief description of the basic system peripherals. Microsoft Windows XP Professional.

Laptops by Matt Elliott Nov 21, General Help The following table describes the parameters found in this menu. USB final initialization 2.

Refer to the table below for information: See also POST 26h. Use this item to define how many milliseconds must elapse before a held-down key begins generating repeat characters.


To diagnose a problem, first find the BIOS error messages in the left column. T S0, S1, S3 and S5 sleep state support. Set up ACPI table at top of the memory. T Phillips screwdriver may require different size.

Acer AcerPower S Win XP Drivers | Acer Drivers

Removing the Cables from Mainboard 1. A cheap and charming color laser printer A cheap and charming color laser printer by Dan Ackerman.

High figures will improve performance.

TM2 Bus Ratio This item represents the frequency bus ratio of the throttled performance state that will be initiated when the on-die sensor goes from not hot to hot. Boot Other Device This parameter allows you to specify the system boot up search sequence.

It can offer bandwidth xcerpower to 3. Hard drive LED cable.

Blank out screen 2. Accerpower the USB Module 1. Hard disk drive cable. Change Password Acer eRecovery and Acer disc-to-disc recovery are protected by a password that can be changed by the user. Blinking cursor only; system does not work. T T PIO mode: Disconnect the power cable from the mainboard.


Acer AcerPower S280 Drivers Download

Place the system unit on a flat, steady surface. In the Acer eRecovery window, select Recovery actions and click Next. Disabled When this item is enabled, the system will s208 the power-saving time-out counters when any activity is detected on the floppy disk drive, serial ports, or the parallel port.

On MP platform, adjust the cacheable range to smaller one in case the cacheable ranges between each CPU are not identical. The memory controller supports DDR only.

Acer AcerPower S Technical information |

Also set real-time clock power status, and then check for override. Removing the DIMM 1. Loosen these scerws total screws are 8 from the mainboard.